Final Project Video

-

https://www.youtube.com/watch?v=OER7Iu4tggE

This is the link to our final project video

We are required to produce a video with the maximum duration of 7 minutes. The video must explain the following components: 

• Explanation on how the data travels from Lecturer’s PC to ULearn System Server. Be creative and precise to get better marks. 

• Elaborate the findings and the experience that your team had discovered while conducting this project

Comments

Post a Comment

Popular posts from this blog

Subnetting Calculation

-
Image
Subnetting allows creat ing smaller network (sub networks or subnets) inside a large network  by borrowing bits from the Host ID portion of the address. The borrowed bits can be used to create additional networks, resulting in smaller-sized networks. This can help to reduce wastage, improve network performance, effective isolation and easier administration. A subnet mask is the representation of the network portion of an address . It is also made up of 32 bits with all the bits that represent the network portion being marked as 1s and the other parts marked as 0s. For a  Class C IPv4 address , the first three octets are used to represent the network part and the last octet is used to represent the host part.    Subnetting Calculation In term of private addressing scheme, UTeM network is class C private addressing scheme which is 192.168.0.0 that will be provided to 30 departments. The default subnet mask is: 255.255.255.0   or   11111111 11111111 11111111 00000000  
Read more

TCP/IP Setting Manual

-
Image
How to  have correctly identified the IP address for the ULearn System Server. The Figure 1 shows the IP configuration of the computer. To display all the current IP configuration, type in  ipconfig/all  on the command   prompt which obtain from DHCP server. Figure 1 : Command Prompt for all the IP Configuration Type in  ipconfig/release  to release the IP address that have assigning from the DHCP server as shown as Figure 2. It shows that this computer no longer have IPv4 configuration. Figure 2 : Command Prompt for Releasing IP Address To manually assign TCP/IP address, open the control panel as shown as Figure 3. At the network and internet, click view network status and task.   Figure 3 : The Control Panel   From this page as shown as Figure 4, click change adapter setting to display all the network connections. Figure 4 : The Network and Sharing Center     The next step is right click on WiFi and choose properties as shown as Figure 5. Figure 5 : The
Read more